Home >> LED Lighting >> Commercial / Warehouse
 
 

LED Fluorescent Tubes

LED Fluorescent Lighting can save you thousands of dollars per fixture

T-8 LED Tubes are Ideal for Fluorescent replacement and have many advantages over Fluorescent Tubes. LED based light source, are environmentally friendly and a much longer life than Fluorescent Tubes with a minimum of 8 to 10 years compared to 2 year with Fluorescent Tubes. This is based on an average of 4000 hours usage per year or about 11 hours a day @ ≤ 77 °F

T-8 LED Tube produces a wonderful pure white light, printed materials appear sharpened, colors brighter and viewing is easier on the eyes than with conventional fluorescent tubes. The T-8 Fluorescent lamp is the most widely used light source in North America, for commercial use. Nearly every large building that you enter has arrays of T-8 fixtures, their ceiling spaces are largely occupied with these.

The average standard T-8 fluorescent tube lasts about 20,000 hours if the temperture is less than 77 °F. When the temp goes higher the the life span of the fluorescent tube goes down. Also short on periods less than three hours also shortens the life span of the fluorescent tubes and being mounted so high in the air it is a large expense, to replace them when they fail. Depending on location work and workers will be disrupted during the replacement of the fluorescent tubes and ballasts, lost production is the highest cost for replacing fluorescent tubes and ballasts. This equates to the highest cost saving for using LED T-8 Tubes. LED T-8's Tubes pay for themselves several times in actual bulb replacement (no more ballast replacement) and labor savings during their lifetimes, the energy savings is substantial, the improved quality of light and the workplace are bonuses.

An LED will operate 100,000 hours before dropping below 75% of their initial lumens output, Fluorescent tubes loose 10% to 20% of their initial lumens output after the initial burn-in period about 7000 hrs. depending on brand. LED's now provide a 120 degree angle of light dispersion, a recent breakthrough, which means they are less focused and spreads the light similarly to an incandescent bulb. While well dispersed the light is directional which adds 46% more useable Lumens, unlike conventional 360 degree fluorescent tube lighting.

Bi-passing you’re Ballast and Starter will save even more energy, 40-50 Watts per fixture or more and improve the workplace without the buzzing and flickering associated with standard fluorescent tubes. A big bonus, no more ballast to replace!


Features & Benefits

  • Up to 66% Energy Savings Consumption
  • High Brightness
  • Easy Installation
  • Extended Life
  • Ballast Bypassed/Removed
  • Instant On
  • High Shock & Vibration Resistance
  • Humidity & Moisture Resistant: IP54
  • No Buzzing
  • No Mercury/Poisons
  • No Radio Frequency Interference
  • No Flickering
  • Fast Return on Investment
  • Universal Voltage 100-277V
  • Product in accordance with CE, CUL,UL, ETL & FCC Testing Standards
  • 5 Year Warranty

Applications:

  • Store Displays
  • Hotels
  • Warehouse
  • Supply Room
  • Task Lighting
  • Office
  • Hospital
  • Parking Lot
  • Under Cabinet
  • RV’s
  • Buses
  • Trains


Cost savings expanded LED Tube Fluorescent Tubes
18 watts 44 watts
Life Span @ 11 hrs. a day @ ≤ 77 °F.   > than 3hrs. on > 10 years > 2years
Cost of Tube. $50.00 $6.00
Cost to replace tubes in 10 years. $0 $30.00
Energy cost for ten years .10 per Kw 11hrs day. $82.00 $182.00
Energy cost for ballast .10 per Kw. 11hrs day. 0 $178.00
Maintenance Cost to replace in 10 years. 15.00 per hr. $7.50 $37.50
Ballast replacement cost. @ 28.00 ea. 0 $224.00
Maintenance Cost Ballast replacement. 15.00 per hr. 0 $75.00
Worker stoppage cost for T-8 replacement @ 35.00 per hr $17.50 $87.50
Worker stoppage cost for ballast replacement @ 35.00 per hr. $0 $175.00
Production slowdown for T-8 replacement @ depends on factory. $0 $1000.00
Production slowdown for ballast replacement @ depends on factory. $0 $1000.00
Federal, State and Provincial rebates and incentives ??? 0
Average total cost for 10 years for 1 fixture. $157.00 $2995.00

 

LED Spotlights

PAR38 LED Bulb 17W 12leds E27/E26

  • Replace a 125W Halogen Lamp to save more than 85% energy.
  • Excellent optics structure having less lumen loss and better illuminating effect.
  • Stepless dimming from 10%-100%, Work well with most of 
    existing dimming system, Non-flicker.
  • Stable and Efficient LED Driver (Efficiency >=85%), 
    with PFC solution (PF>0.92).
  • Dust-proof design - IP6X. Designed for industrial environment.
Applications
  • Offices, factories, shopping malls, schools, garages, 
  • airports, metro, household lighting



PAR30 LED Bulb 12W 7leds E27/E26

UL,CUL, FCC, ROHS, CE, Energy Star, C-TICK, SAA,

Product Features

  1. Replacement of 100W Halogen Lamp. To save more than
    85% energy.
  2. Excellent optics structure: Less lumen loss and better 
    illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of 
    existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=85%), with PFC
    solution (PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial 
    environment.

Applications

Offices, factories, shopping malls, schools, garages, airports, 
metro, household lighting, etc. 

Model PAR30 LED Bulb 12W 7leds E27/E26
Power Consumption 12.5W
Input Voltage AC110V, AC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 640 lm 704 lm 768 lm
Efficacy(Typical) 51.2 lm/w 56.32 lm/w 61.44 lm/w
Color Rendering Index >82 >75 >70
Base Type E27 or E26
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 30°/ 45°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES


PAR20 LED Bulb 8W 4leds E27/E26

Certification: UL,CUL, FCC, ROHS, CE,

Product Features:

  1. Replacement of 75W Halogen Lamp. To save more than 85% energy.
  2. Excellent optics structure: Less lumen loss and better illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=82%), with PFC solution(PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial environment.

Applications

Offices, factories, shopping malls, schools, garages, airports, metro, household lighting, etc.

 

Model PAR20 LED Bulb 8W 4leds E27/E26
Power Consumption 8W
Input Voltage AC110V, AC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 423 lm 460 lm 498 lm
Efficacy(Typical) 52.87 lm/w 57.5 lm/w 62.25 lm/w
Color Rendering Index >82 >75 >70
Base Type E27 or E26
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 15°/ 30°/ 45°/60°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES

 

 

LED High Bay Lights / Canopy Lights

Ideal for gas stations, warehouses, parking lots, gyms, stadiums


LED High Bay Lighting Benefits
  • LED high bay lights are more energy efficient. They use smaller watts of power than other lights and a savings up to 80% can be seen in electric bills when used in conjunction with sensors and a lighting management system.
  • LED Lighting lasts for a longer time period and therefore needs to be changed less often. Up to ten times the duration of other light bulbs. The decrease in maintenance and disposal pays for the light over time.
  • They do not heat up when they are on, like other lights do. This can decrease the need for air conditioning by as much as 20%. This savings on the electric bill can be factored into ROI.
  • LED high bay lights are more durable and withstand the test of time, provided that a quality product is selected suitable to the application. 
  • LED high bay lighting is flicker free, starts near instantly, turns on or off repeatedly without problem or degeneration. Fluorescent lighting can emit a great deal of flickering causing issues with personnel and contain mercury toxins. You can expect that a better work environment will result from using LED lighting.
  • Less light distortion is noticed with LED lighting, and this decreases operator and worker fatigue.
  • Static buildup is minimal with LED lighting.
  • Light uniformity is greatly improved when high bay LED lighting is used, with as much as 8% better light distribution being reported.
  • Total Power: 35W;
  • Input voltage: DC12V/24V;AC100-240V;
  • Lamp Size: 395*190*190mm;
  • LED Chips: 30pcs BridgeLUX;
  • . C.T.: 3000-3500K/5000-5500K/6000-6500K;
  • Luminous Flux: 3300LM;
  • Aluminum and Reinforced Glass
  • Power Factor: ≥0.99
  • 9. IP Rating: 66
  • 10.UL Listed MEANWELL power supply.
  • Total Power: 65W;
  • Input voltage: DC12V/24V;AC100-240V;
  • Lamp Size: 395*275*190mm;
  • LED Chips: 60pcs BridgeLUX;
  • C.T.: 3000-3500K/5000-5500K/6000-6500K;
  • Luminous Flux: 6600LM;
  • Aluminum and Reinforced Glass;
  • Power Factor: ≥0.99;
  • IP Rating: 66;
  • UL Listed MEANWELL power supply.
  • Total Power: 100W;
  • Input voltage: DC12V/24V;AC100-240V;
  • Lamp Size: 395*360*190mm;
  • LED Chips: 90pcs BridgeLUX;
  • C.T.: 3000-3500K/5000-5500K/6000-6500K;
  • Luminous Flux: 9900LM;
  • Aluminum and Reinforced Glass;
  • Power Factor: ≥0.99;
  • IP Rating: 66;
  • UL Listed MEANWELL power supply.
  • Total Power: 135W;
  • Input voltage: DC12V/24V;AC100-240V;
  • Lamp Size: 395*445*190mm;
  • LED Chips: 120pcs BridgeLUX;
  • C.T.: 3000-3500K/5000-5500K/6000-6500K;
  • Luminous Flux: 13200LM;
  • Aluminum and Reinforced Glass;
  • Power Factor: ≥0.99;
  • IP Rating: 66;
  • UL Listed MEANWELL power supply.
  • Total Power: 165W;
  • Input voltage: DC12V/24V;AC100-240V;
  • Lamp Size: 395*530*190mm;
  • LED Chips: 150pcs BridgeLUX;
  • C.T.: 3000-3500K/5000-5500K/6000-6500K;
  • Luminous Flux: 16500LM;
  • Aluminum and Reinforced Glass;
  • Power Factor: ≥0.99;
  • IP Rating: 66;
  • UL Listed MEANWELL power supply.
  • Total Power: 200W;
  • Input voltage: DC12V/24V;AC100-240V;
  • Lamp Size: 395*615*190mm;
  • LED Chips: 180pcs BridgeLUX;
  • C.T.: 3000-3500K/5000-5500K/6000-6500K;
  • Luminous Flux: 19800LM;
  • Aluminum and Reinforced Glass;
  • Power Factor: ≥0.99;
  • IP Rating: 66;
  • UL Listed MEANWELL power supply.
  • Total Power: 220W;
  • Input voltage: DC12V/24V;AC100-240V;
  • Lamp Size: 395*700*190mm;
  • LED Chips: 210pcs BridgeLUX;
  • C.T.: 3000-3500K/5000-5500K/6000-6500K;
  • Luminous Flux: 23100LM;
  • Aluminum and Reinforced Glass;
  • Power Factor: ≥0.99;
  • IP Rating: 66;
  • UL Listed MEANWELL power supply.


 

LED Floodlights



  • LED Floodlights are the modern choice for lighting of various large areas and places. They can be used for lighting parking lots, open and closed working sites, as well as for decorative lighting for buildings.

  • The main benefit of LED Floodlights is their energy saving feature, which is crucial for the cases, when the light must be kept on during the whole night.

  • LED Floodlights are 10 times more economical than the older halogen floodlights, and thanks to that, the investment made for their purchase will be paid back within 1 year.

  • The other big benefit of the LED Floodlights is their long life, which is more than 5 times longer than that of the old halogen floodlights.

  • The LED Floodlights have a high level of IP 67 protection, which allows for their use in various weather conditions.

  • The LED lights have a handy flexible stand, which will allow you to point the light to any direction you want to.

20 Watt Led Floodlight

Voltage: 85-264 AC 50/60Hz
LED working voltage: 29-36V DC
LED Power Consumption: 1x20W
System Power Consumption: 25W
Power Factor: >0.95
Power Efficiency: >0.80

IP65

Lumens output:

Warm White(2700k--3300k): >1320lm
Pure White(4500k--5000k): >1350lm
Cool White(6000k-7000k): >1390lm
Lamp's Efficiency: >0.85

Average Illuminance:

2m: >70.03lux
4m: >17.51lux
6m: >7.78lux

Illuminace Area:

2m: 8m x 5m
4m: 14m x 11m
6m: 17m x 15m

Illuminance Uniformity: >0.6
LED Lifetime: >50,000hrs
Dimension: 180x140x100mm
N.W.: 1.22kg
G.W.: 1.35kg
Color of Housing: Black

30 Watt Led Floodlight

Voltage: 85-264 AC 50/60Hz
LED working voltage: 30-36V DC
LED Power Consumption: 1x30W
System Power Consumption: 36W
Power Factor: >0.95
Power Efficiency: >0.87

IP65

Lumens output:

Warm White(2700k--3300k): >2150lm
Pure White(4500k--5000k): >2180lm
Cool White(6000k-7000k): >2200lm
Lamp's Efficiency: >0.85

Average Illuminance:

4m: >17lux
6m: >7.5lux
8m: >4.5lux

Illuminace Area:

4m: 11.2m diameter
6m: 16.9m diameter
8m: 22.5m diameter

Illuminance Uniformity: >0.6
LED Lifetime: >50,000hrs
Dimension: 225x185x135mm
N.W.: 2.35kg
G.W.: 2.67kg
Color of Housing: Black

50 Watt Led Floodlight

Voltage: 100-240 AC 50/60Hz
LED working voltage: 30-36V DC
LED Power Consumption: 1x50W
System Power Consumption: 56W
Power Factor: >0.95
Power Efficiency: >0.87

IP65

Lumens output:

Warm White(2700k--3300k): >3300lm
Pure White(4500k--5000k): >3350lm
Cool White(6000k-7000k): >3400lm
Lamp's Efficiency: >0.85

Average Illuminance:

3m: >68lux
4m: >34lux
5m: >24lux

Illuminace Area:

6m: 6.9m diameter
8m: 9.2m diameter
10m: 11.5m diameter

Illuminance Uniformity: >0.6
LED Lifetime: >50,000hrs
Dimension: 290x235x150mm
N.W.: 3.55kg
G.W.: 3.98kg
Color of Housing: Black

 
Sign up for Newsletter and Save!
Click Here for More Information
Contact Information

Phone: 1-306-244-8808
Fax: 1-306-244-9970

WSE Technologies
303 - 47Str. E
Saskatoon, Saskatchewan
Canada
S7K 5H2
Customer Support & Warranty
 
Home   |   LED Lighting   |   Solar   |   About WSE   |   Contact WSE   | Download Catalogue  |