Home >> LED Lighting >> Home
 
 

LED Fluorescent Tubes

LED Fluorescent Lighting can save you thousands of dollars per fixture

T-8 LED Tubes are Ideal for Fluorescent replacement and have many advantages over Fluorescent Tubes. LED based light source, are environmentally friendly and a much longer life than Fluorescent Tubes with a minimum of 8 to 10 years compared to 2 year with Fluorescent Tubes. This is based on an average of 4000 hours usage per year or about 11 hours a day @ ≤ 77 °F

T-8 LED Tube produces a wonderful pure white light, printed materials appear sharpened, colors brighter and viewing is easier on the eyes than with conventional fluorescent tubes. The T-8 Fluorescent lamp is the most widely used light source in North America, for commercial use. Nearly every large building that you enter has arrays of T-8 fixtures, their ceiling spaces are largely occupied with these.

The average standard T-8 fluorescent tube lasts about 20,000 hours if the temperture is less than 77 °F. When the temp goes higher the the life span of the fluorescent tube goes down. Also short on periods less than three hours also shortens the life span of the fluorescent tubes and being mounted so high in the air it is a large expense, to replace them when they fail. Depending on location work and workers will be disrupted during the replacement of the fluorescent tubes and ballasts, lost production is the highest cost for replacing fluorescent tubes and ballasts. This equates to the highest cost saving for using LED T-8 Tubes. LED T-8's Tubes pay for themselves several times in actual bulb replacement (no more ballast replacement) and labor savings during their lifetimes, the energy savings is substantial, the improved quality of light and the workplace are bonuses.

An LED will operate 100,000 hours before dropping below 75% of their initial lumens output, Fluorescent tubes loose 10% to 20% of their initial lumens output after the initial burn-in period about 7000 hrs. depending on brand. LED's now provide a 120 degree angle of light dispersion, a recent breakthrough, which means they are less focused and spreads the light similarly to an incandescent bulb. While well dispersed the light is directional which adds 46% more useable Lumens, unlike conventional 360 degree fluorescent tube lighting.

Bi-passing your Ballast and Starter will save even more energy, 40-50 Watts per fixture or more and improve the workplace without the buzzing and flickering associated with standard fluorescent tubes. A big bonus, no more ballast to replace!


Features & Benefits

  • Up to 66% Energy Savings Consumption
  • High Brightness
  • Easy Installation
  • Extended Life
  • Ballast Bypassed/Removed
  • Instant On
  • High Shock & Vibration Resistance
  • Humidity & Moisture Resistant: IP54
  • No Buzzing
  • No Mercury/Poisons
  • No Radio Frequency Interference
  • No Flickering
  • Fast Return on Investment
  • Universal Voltage 100-277V
  • Product in accordance with CE, CUL,UL, ETL & FCC Testing Standards
  • 5 Year Warranty

Applications:

  • Store Displays
  • Hotels
  • Warehouse
  • Supply Room
  • Task Lighting
  • Office
  • Hospital
  • Parking Lot
  • Under Cabinet
  • RV’s
  • Buses
  • Trains


Cost savings expanded LED Tube Fluorescent Tubes
18 watts 44 watts
Life Span @ 11 hrs. a day @ ≤ 77 °F.   > than 3hrs. on > 10 years > 2years
Cost of Tube. $50.00 $6.00
Cost to replace tubes in 10 years. $0 $30.00
Energy cost for ten years .10 per Kw 11hrs day. $82.00 $182.00
Energy cost for ballast .10 per Kw. 11hrs day. 0 $178.00
Maintenance Cost to replace in 10 years. 15.00 per hr. $7.50 $37.50
Ballast replacement cost. @ 28.00 ea. 0 $224.00
Maintenance Cost Ballast replacement. 15.00 per hr. 0 $75.00
Worker stoppage cost for T-8 replacement @ 35.00 per hr $17.50 $87.50
Worker stoppage cost for ballast replacement @ 35.00 per hr. $0 $175.00
Production slowdown for T-8 replacement @ depends on factory. $0 $1000.00
Production slowdown for ballast replacement @ depends on factory. $0 $1000.00
Federal, State and Provincial rebates and incentives ??? 0
Average total cost for 10 years for 1 fixture. $157.00 $2995.00

 

LED Spotlights

PAR38 LED Bulb 17W 12leds E27/E26

  • Replace a 125W Halogen Lamp to save more than 85% energy.
  • Excellent optics structure having less lumen loss and better illuminating effect.
  • Stepless dimming from 10%-100%, Work well with most of 
    existing dimming system, Non-flicker.
  • Stable and Efficient LED Driver (Efficiency >=85%), 
    with PFC solution (PF>0.92).
  • Dust-proof design - IP6X. Designed for industrial environment.
Applications
  • Offices, factories, shopping malls, schools, garages, 
  • airports, metro, household lighting



PAR30 LED Bulb 12W 7leds E27/E26

UL,CUL, FCC, ROHS, CE, Energy Star, C-TICK, SAA,

Product Features

  1. Replacement of 100W Halogen Lamp. To save more than
    85% energy.
  2. Excellent optics structure: Less lumen loss and better 
    illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of 
    existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=85%), with PFC
    solution (PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial 
    environment.

Applications

Offices, factories, shopping malls, schools, garages, airports, 
metro, household lighting, etc. 

Model PAR30 LED Bulb 12W 7leds E27/E26
Power Consumption 12.5W
Input Voltage AC110V, AC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 640 lm 704 lm 768 lm
Efficacy(Typical) 51.2 lm/w 56.32 lm/w 61.44 lm/w
Color Rendering Index >82 >75 >70
Base Type E27 or E26
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 30°/ 45°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES


PAR20 LED Bulb 8W 4leds E27/E26

Certification: UL,CUL, FCC, ROHS, CE,

Product Features:

  1. Replacement of 75W Halogen Lamp. To save more than 85% energy.
  2. Excellent optics structure: Less lumen loss and better illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=82%), with PFC solution(PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial environment.

Applications

Offices, factories, shopping malls, schools, garages, airports, metro, household lighting, etc.

 

Model PAR20 LED Bulb 8W 4leds E27/E26
Power Consumption 8W
Input Voltage AC110V, AC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 423 lm 460 lm 498 lm
Efficacy(Typical) 52.87 lm/w 57.5 lm/w 62.25 lm/w
Color Rendering Index >82 >75 >70
Base Type E27 or E26
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 15°/ 30°/ 45°/60°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES

 



MR16 LED Bulb 4W "Astar series"

Product Description

Astar series use the secondary optical technology, own completely independent intellectual property rights and patents. This new design uses medium power light led instead of high power led, greatly develops and combines the features of high lighting efficiency, better heat dissipation, low cost and mature technology for small & medium power led, meanwhile, with the good condensation lighting feature of high power led, we get the products with the biggest & best performance by using the lowest cost.

 

Applications

  1. The key point for the good performance is "ASTAR" lens with our own patents.
  2. Lighting efficacy is improved more than 40%
  3. High cost performance – it's cheaper than normal products, but brighter than "CREE Product"
  4. CRI and lighting efficacy meet the test standards of LM-79 & lm-80
  5. High efficiency dimmable driver, PF>0.92
  6. MR16 can be compatible withal electronic transformers, no flicking
  7. Reasonable dimensions could match with traditional lighting fixtures
  8. Filing the vacancy of integration products without wide-angle lens
  9. Modular design, green, environment-protection, recoverable
  10. Approved CE,ROHS,FCC,UL&CUL certificates and meet ip63 standards
Model MR16 LED Bulb 4W (Astar series)
Power Consumption 4W
Input Voltage AC / DC 12V
Frequency 0-80 kHz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical)  290 lm  320 lm  350 lm
Efficacy(Typical)  70 lm/w  75 lm/w  83 lm/w
Color Rendering Index >82 >75 >70
Base Type GU5.3
Power Factor N/A
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle  
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES


GX53 LED Bulb 7W "Astar Series"

Certification:  UL,CUL, FCC, ROHS, CE,

Product Description:

Astar series use the secondary optical technology, own completely independent intellectual property rights and patents. This new design uses medium power light led instead of high power led, greatly develops and combines the features of high lighting efficiency, better heat dissipation, low cost and mature technology for small & medium power led, meanwhile, with the good condensation lighting feature of high power led, we get the products with the biggest & best performance by using the lowest cost.
Applications :

  1. The key point for the good performance is "ASTAR" lens with our own patents.
  2. Lighting efficacy is improved more than 40%
  3. High cost performance – it's cheaper than normal products, but brighter than "CREE Product"
  4. CRI and lighting efficacy meet the test standards of LM-79 & lm-80
  5. High efficiency dimmable driver, PF>0.92
  6. MR16 can be compatible withal electronic transformers, no flicking
  7. Reasonable dimensions could match with traditional lighting fixtures
  8. Filing the vacancy of integration products without wide-angle lens
  9. Modular design, green, environment-protection, recoverable
  10. Approved CE,ROHS,FCC,UL&CUL certificates and meet ip63 standards
Model GX53-7W  "Astar Series"
Power Consumption 7W
Input Voltage AV110V / DC230V
Frequency 0-80 KHz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical)  410 lm 440 lm  474 lm
Efficacy(Typical)  58 lm/w  62.5 lm/w  68 lm/w
Color Rendering Index >82 >75 >70
Base Type GX53
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 60°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES

 


GU10 LED Bulb 5W "Astar Series"

Certification: UL,CUL, FCC, ROHS, CE, C-TICK, SAA,

Product Description:

Astar series use the secondary optical technology, own completely independent intellectual property rights and patents. This new design uses medium power light led instead of high power led, greatly develops and combines the features of high lighting efficiency, better heat dissipation, low cost and mature technology for small & medium power led, meanwhile, with the good condensation lighting feature of high power led, we get the products with the biggest & best performance by using the lowest cost.

Applications :

  1. The key point for the good performance is "ASTAR" lens with our own patents.
  2. Lighting efficacy is improved more than 40%
  3. High cost performance – it's cheaper than normal products, but brighter than "CREE Product"
  4. CRI and lighting efficacy meet the test standards of LM-79 & lm-80
  5. High efficiency dimmable driver, PF>0.92
  6. MR16 can be compatible withal electronic transformers, no flicking
  7. Reasonable dimensions could match with traditional lighting fixtures
  8. Filing the vacancy of integration products without wide-angle lens
  9. Modular design, green, environment-protection, recoverable
  10. Approved CE,ROHS,FCC,UL&CUL certificates and meet ip63 standards
Model GU10-LED-Bulb-5W "Astar Series"
Power Consumption 5W
Input Voltage AC 110V / DC 230V
Frequency 50-60 Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 320 lm 345 lm 380 lm
Efficacy(Typical) 62 lm/w 67 lm/w 74 lm/w
Color Rendering Index >82 >75 >70
Base Type GU10
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle  
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES


ES111 LED Bulb 12W 5leds GU10

Product Features:

  1. Replacement of 100W Halogen Lamp. To save more than 85% energy.
  2. Excellent optics structure: Less lumen loss and better illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=85%), with PFC solution(PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial environment.

Applications

Offices, factories, shopping malls, schools, garages, airports, metro, household lighting, etc.

Model ES111-LED-12W-5-GU10
Power Consumption 12.5W
Input Voltage AC110V,DC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 574 lm 630 lm 685 lm
Efficacy(Typical) 45.92 lm/w 50.04 lm/w 54.8 lm/w
Color Rendering Index >82 >75 >70
Base Type GU10
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 15° /30°/ 45°/60°
Operating Temp. -25°C to +40°C
Warranty 3 Years
Dimmable YES


 

LED Lights and Lamps

A19 LED bulb 5W/7W (New)

Feature

  • Replacement of 50W incandescent lamp, save 
    more than 85% energy
  • Perfect Dimming: stepless dimming from 
    10%-100%, work well with most of SCR dimmers
  • Stable and efficient LED Driver
    (efficiency>=85%), with PFC solution(PF>0.92)
  • 3 years warranty

Specifications

  • Voltage: AC 110V, AC 230V
  • Base Type: E26/E27
  • Lifespan: >50,000hours
  • Protection Rate: IP63
  • Dimmable: Yes
Model A19-5W-E27 A19-7W-E27
Color Temp. (Typ.) 3000K 4200K 6000K 3000K 4200K 6000K
FLUX(Typ.) 389lm 432lm 480lm 440lm 486lm 540lm
CRI >75 >75
Beam Angle 180° 180°



G70 LED Bulbs 9W E26/E27

Certification: UL,CUL, PSE,FCC, ROHS, CE, Energy Star, C-TICK, SAA,

Product description :

The driver, PC cover, Led chips and other key components of the product are used with high quality materials and superior solutions. Combined effectively with all key components and superior features ,with the application of a new technology , It makes a great progress in optical efficiency with very low cost, the output lumen up to 110LM / W for the finished bulbs.

Product Features:

  1. Replacement of 50W Halogen Lamp. To save more than 85% energy.
  2. Excellent optics structure: Less lumen loss and better illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=82%), with PFC solution(PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial environment.
  6. Lighting efficacy is improved more than 30%;
  7. Rich color temperature CCT = 2500K ~ 7000K;
  8. CRI and lighting efficacy meets the test standards of LM-79&LM-80.
  9. 85% high-efficiency dimmable driver solution, which work well with most of dimmers in the Europe, Amercia and Austrilia market
  10. Light transmittance of the PC cover raises up to 96%;
  11. Modular design, green, environment-protection and recyclable;
  12. Approved CE、ROHS、FCC, UL&CUL certificates and meet IP63 standards.

Applications
Offices, factories, shopping malls, schools, garages, airports, metro, household lighting, etc.

Model G70-LED-Bulbs-9W-E26/E27
Power Consumption 9W
Input Voltage AC110V, AC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 680 lm 780 lm 850 lm
Efficacy(Typical) 75.55 lm/w 86.66 lm/w 94.44 lm/w
Color Rendering Index 75-85 75-85 75-85
Base Type E27 or E26
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 180°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES

Dimmable LED Lights

Dimmable led bulbs 7W

Certification: UL,CUL, PSE,FCC, ROHS, CE, Energy Star, C-TICK, SAA,

Product description :

The driver, PC cover, Led chips and other key components of the product are used with high quality materials and superior solutions. Combined effectively with all key components and superior features ,with the application of a new technology , It makes a great progress in optical efficiency with very low cost, the output lumen up to 110LM / W for the finished bulbs.

Product Features:

  1. Replacement of 50W Halogen Lamp. To save more than 85% energy.
  2. Excellent optics structure: Less lumen loss and better illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=82%), with PFC solution(PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial environment.
  6. Lighting efficacy is improved more than 30%;
  7. Rich color temperature CCT = 2500K ~ 7000K;
  8. CRI and lighting efficacy meets the test standards of LM-79&LM-80.
  9. 85% high-efficiency dimmable driver solution, which work well with most of dimmers in the Europe, Amercia and Austrilia market
  10. Light transmittance of the PC cover raises up to 96%;
  11. Modular design, green, environment-protection and recyclable;
  12. Approved CE、ROHS、FCC, UL&CUL certificates and meet IP63 standards.

Applications
Offices, factories, shopping malls, schools, garages, airports, metro, household lighting, etc.

Model LED-Bulbs-7W-E26/E27
Power Consumption 7W
Input Voltage AC110V, AC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 600 lm 670 lm 720 lm
Efficacy(Typical) 85.71 m/w 95.71 lm/w 102.85 lm/w
Color Rendering Index 75-85 75-85 75-85
Base Type E27 or E26
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 180°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES



Dimmable led bulbs 9W

Certification: UL,CUL, PSE,FCC, ROHS, CE, Energy Star, C-TICK, SAA,

Product description :

The driver, PC cover, Led chips and other key components of the product are used with high quality materials and superior solutions. Combined effectively with all key components and superior features ,with the application of a new technology , It makes a great progress in optical efficiency with very low cost, the output lumen up to 110LM / W for the finished bulbs.

Product Features:

  1. Replacement of 50W Halogen Lamp. To save more than 85% energy.
  2. Excellent optics structure: Less lumen loss and better illuminating effect.
  3. Stepless dimming from 10%-100%, Work well with most of existing dimming system, Non-flicker.
  4. Stable and Efficient LED Driver (Efficiency>=82%), with PFC solution(PF>0.92).
  5. Dust-proof design: IP6X. Designed for industrial environment.
  6. Lighting efficacy is improved more than 30%;
  7. Rich color temperature CCT = 2500K ~ 7000K;
  8. CRI and lighting efficacy meets the test standards of LM-79&LM-80.
  9. 85% high-efficiency dimmable driver solution, which work well with most of dimmers in the Europe, Amercia and Austrilia market
  10. Light transmittance of the PC cover raises up to 96%;
  11. Modular design, green, environment-protection and recyclable;
  12. Approved CE、ROHS、FCC, UL&CUL certificates and meet IP63 standards.

Applications
Offices, factories, shopping malls, schools, garages, airports, metro, household lighting, etc.

Model LED-Bulbs-9W-E26/E27
Power Consumption 9W
Input Voltage AC110V, AC230V
Frequency 50-60Hz
Color Warm white Natural white Cool white
Color Temp. (Typical) 3000K 4200K 6500K
Luminous(Typical) 680 lm 780 lm 850 lm
Efficacy(Typical) 75.55 lm/w 86.66 lm/w 94.44 lm/w
Color Rendering Index 75-85 75-85 75-85
Base Type E27 or E26
Power Factor >0.92
Life Time >50000hrs
Housing Material Pure Aluminum
Beam Angle 180°
Operating Temp. -20°C to +40°C
Warranty 3 Years
Dimmable YES

 

 
Sign up for Newsletter and Save!
Click Here for More Information
Contact Information

Phone: 1-306-244-8808
Fax: 1-306-244-9970

WSE Technologies
303 - 47Str. E
Saskatoon, Saskatchewan
Canada
S7K 5H2
Customer Support & Warranty
 
Home   |   LED Lighting   |   Solar   |   About WSE   |   Contact WSE   | Download Catalogue  |